motorola cell phone cases/Configure BSNL type IV (MT841) for auto connect to internet and wireless s

Author: web Add date: 05/11/2008 Publishing date: 05/11/2008 Hits: 8

Total 2 pages, Current page:1, Jump to page:

This is the step by step procedure on how to configure BSNL Type IV (MT841) modem for autodial and wireless setup:

First go to your computer eathernet connection setup and change the IP of your eathernet card to the following:
.

first go to Network Connections,, then right click on your ethernet network avaliable, then click on properties,, then select TCP/IP from the list and click on properties,, then select use the followin IP address and type:

IP Address : 192.168.1.2
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1

Preffered DNS Server: 61.1.96.69
Alternate DNS Server: 61.1.96.71

and save d changez,,

Then:

1) First open internet explorer and type in IP: 192.168.1.1
2) Then it will ask u for username and password,, username and password is admin

On the left side you see the wizard from basic drop down list select connections. Left side you see PVC0 to PVC6 now you only need to change the value of PVC0 to dial up the connection automatically with PPPoE setup. but some how you can not edit the connection of PVC0 by clicking the note icon on the configuration screen. it only let you change the settings for wich the PVC is created and let you delete it. so you need to delete all the PVC in the list. Stat from PVC6 press notes icon and delete.

Do the same process for PVC6 to PVC2 and PVC0 do not delete PVC1 untill you create new PVC.

now press the new button and create new PVC specify following parametere in the PVC

WAN Type : PPPoE
VPI/VCI : 0/35
Encapsulation : LLC
Default Route : Enable
User Name : <Your internet user Name>
Password : <your internet password >
use DNS : Enable
now click on apply. It will show new PVC and it display it as PVC1 now delete PVC0 from the list and start create remaining PVC for your connection by pressing new.
All PVC shoud have following property.

Wan Type : Bridge
Encapsulatino : LLC
and for VPI/VCI follow these steps:

PVC1 : 8 /35
PVC2 : 0 /100
PVC3 : 0 /32
PVC4 : 8 /81
PVC5 : 8 / 32
PVC6 : 14 / 24
now you have created all the PVC's, with you dialer configured at PVC1

Go to advanced select Firewall and select enable.

Go to DNS select Enable and put following value in the DNS

Primary DNS : 61.1.96.69
Secondry DNS : 61.1.96.71

save your change by clicking save all,, it will save d changes a reboot ur modem.

After reboot you should be automatically connect to the internet without dialing PPPoE dialer from the computer.

U also need to do security settings in ur modem and ur handset,, (like wep key)

First security settings for your modem so that no1 else can use ur internet:

Under Basic tab on the left hand side of modem settings(expand it) you will find WLAN option,, click on it

It should be like this:

SSID: MT841( ur modem name,, it will be needed on ur mobile phone also.. u can even rename it)

Channel: 6

Module: High Rate

WEP Method: WEP

WEP: 128 Bit ASCII

Enter WEP KEY 1: set it to abbccddeeffgg

leave other WEP keyz blank

Intra BSS: Enabled

SSID Hidden: Disabled

After doin the above settingz, save them by clicking on save all button n it will save the settingz and restart your modem..

Other pages: : 1 * 2 * Next>>

Prev:dct6412 motorola hdtv dual tuner dvr cable box/Wi_fi On Nokia N80 ... Help !!!

Next:muzika za mobitel motorola/can u help me with phone guardian software uninstallation

Comment:

Category: Home -> others -> other2