Author: web   Add date: 04/09/2008   Publishing date: 04/09/2008   Hits: 0

---

Are the screws that hold the power button thingie in place on the N95-1 dropped my phone and chewed up the top part, new one is ?.49 from nokiaparts http://www.hongblog.net but havent got any tiny torx here so was gonna order the screwdriver, dont wanna just order both lol ------------------ its better to get them both for compatibility. you wouldn't want to be using a different sized torx and wearing off the thread on the screw ------------------ You need Torx 6 for the casing screws and Torx 5 for the screws that hold the fascia-panel. The screw-material is very soft, be sure that the torx-driver is good quality and a good fit or you'll damage the heads of the screws. EDIT: See the videos at the foot of this article for disassembly instructions. ------------------ Have you asked Nokiaparts if he supplies replacement screws? ------------------ I did manage with a Torx 6 on my previous handset but only just. I would get both as suggested. ------------------ Quote:------------------ Famous last words? Good luck with it, hope it all goes to plan.

Prev:N95 Using the internet through PC

Next:Just wondering...

Comment:

---

Category: Home -> nokia