Author: web   Add date: 04/16/2008   Publishing date: 04/17/2008   Hits: 0

---

Total 3 pages, Current page:1, Jump to page: 123

iPhone | How to Unlock a 1.1.1 or 1.1.2 Upgraded iPhone Using Windows iPhone | How to Unlock a 1.1.1 or 1.1.2 Upgraded iPhone Using Windows These are instructions are on how to unlock a 1.1.1 iPhone or an iPhone that has been upgraded to 1.1.2 firmware. These instructions do not work for a 1.1.2 iPhone new from the store. http://www.hongblog.net If your firmware is 1.1.1 please use iTunes to update to latest firmware(1.1.2) before starting this tutorial! You need to do this otherwise the unlocker used in this tutorial won't work. DOWNGRADE TO 1.1.1 For this you will need iBrickr 0.91, iTunes 7.5, and iPhone Firmware 1.1.1 - Update iTunes to get the latest version. - Download iBrickr 0.91 from here: iBrickr will say Please wait while iBrickr tries to fix your phone. The iPhone will reboot and display the Activate screen again! You can now close iBrickr. JAILBREAK 1.1.1 Step One At the "Activate iPhone" screen move the slider to the right for emergency calling. Step Two Dial "*#307#" then press the Call button. Step Three You will hear the phone call itself. Use the back arrow to clear the number you just enter. Now dial "0" then press the Call button. Step Four Now you will be able to see the incoming call. Press the Accept button. Step Five Now press the Hold button to put the call on hold. Step Six The phone will call itself again. This time press the Decline button. Step Seven We now are shown the keypad again. Click the contacts tab at the bottom. We are now presented with an empty contacts menu. Click the plus( ) button to add a new contact. Step Eight Press Add New URL. Step Nine Input prefs: as the url then press the Save button. Step Ten Press Add New URL again. Step Eleven Input http://jailbreakme.com as the url then press the Save button. Step Twelve Now in the contact view you will see the 2 urls. Press the prefs: url. Step Thirteen This will bring up the iPhone's Settings Menu. Select your wireless network from the Wi-Fi category. Press the Settings button at the top left to go back to the Settings Menu. Step Fourteen Select the General category from the Settings Menu. Then select the Auto-Lock subcategory. Press to select Never from the list of Auto-Lock times. Press the Settings button at the top left to return to the settings window. Step Fifteen Press the Home button. At the "Activate iPhone" screen move the slider to the right for emergency calling. Step Sixteen Now dial "0" then press the Call button. Step Seventeen Now you will be able to see the incoming call. Press the Accept button. Step Eighteen Now press the Hold button to put the call on hold. Step Nineteen The phone will call itself again. This time press the Decline button. Step Twenty We now are presented with our contacts menu. Press to select the contact we added. Step Twenty One Press the http://jailbreakme.com url. This will open Safari and take you to jailbreakme.com Step Twenty Two Scroll down to the bottom of the page and press Install AppSnapp. Phone will return to activation screen, but don't panic, just wait. iPhone should automaticly restart after almost a minute. When the phone starts again, it should no longer say Slide to emergency, but rather Slide to Unlock. This means it was successfull! UNLOCK 1.1.1 To Unlock the iPhone you will need WinSCP, and anySIM 1.2u - Download WinSCP from: here : http://winscp.net/download/winscp405setup.exe   Other pages: : 1 * 2 * 3 * Next>> Prev:iphone problem pls help Next:Guide: How to downgrade from 1.1.2 to 1.0.2. Comment: Category: Home -> iphone

Home