i used masking tape on mine and a friends. it works great. did them both about 2 months ago and they are still perfect. need a good quality TX5 drive. i had to keep sharpening mine, it was a poor quality one from maplins. the ends rounded over very easily on the driver. I have heard people have ruined the screw heads so be careful. good luck.
.
------------

I used Masking tape too. not had any problems either.
------------

If you're fixing the loose slider, using the method outlined in the TIPS section, the adhesive tape should be of a material that isn't compressed once clamped down. I used double-sided adhesive tape with the thin paper backing left on one side, as I had some to hand at the time. Masking-tape is also suitable, normal transparent tape will work but may require several layers... and is less easily applied to the inside edge of the metal fixing-bracket.
------------

Thanks guys; that should just be added to the TIPS section just for future reference. Do I need a T5 or T6? Your wish is my command! ;)
------------

For the fascia-plate screws you need a T5 , although a T5 will do the job, with care.
------------

Thanks for the help. Will post results once I get the screwdriver off ebay.
------------

I used insulation tape on mine and it worked perfectly.